Custom Ornamental Steel Staircase and Railing

This is one of the most involved projects we have completed and one we are genuinely proud to show. The homeowner had a very clear vision for a grand interior staircase with a custom geometric railing pattern and we worked closely with them to fabricate and install every piece of it. The sweeping curved stair with the two story open foyer required the railing to flow continuously from the ground floor landing all the way up and around the curve to the second floor, which is a significant fabrication challenge.

The geometric panel design was drawn up specifically for this home. Every panel was cut and fabricated in our shop to match the pattern consistently across the entire run, and when you're working on a curved staircase the panels have to be developed so the geometry reads correctly as the railing changes angle. That is not a straightforward process and it requires precision at every stage from the shop drawings to the final installation.

The two tone finish with the black steel against the white walls and the warm ceiling lighting was intentional and the result speaks for itself. A staircase like this is the centerpiece of the home. Everyone who walks through that front door sees it immediately and it sets the tone for the entire interior. The craftsmanship our team put into this job is evident in the finished product and it represents the highest level of what Federal Iron Works is capable of delivering.